Case studies of Renewable energy installations in Scotland & Northumberland

Case Studies

Renewable Solutions delivered to homes around the UK

From the Isle of Harris to the Home Counties, new builds to older properties, unique solutions for individual customers. Here are just a few of the installations we have carried out using a host of different technologies. For more information or if you would like a free consultation please use our contact form.

  • Solar PV Battery TESLA in Aboyne

    A bespoke 10KW Solar PV array with TESLA battery technology

    With a thermally efficient house being built, our self build clients asked us to design the heating, electical and renewables solutions that would help to deliver running costs as close to zero as possible. We designed and installed the following solutions: a NIBE 12KW GSHP, 30 Kingspan evacuated tubes, underfloor heating and all electrical works a...

  • A 16KW ASHP heating the house, the pool and a solar PV array

    A range of technologies in an amazing new build

    This stunning 400m2 new build on the coast in the West of Scotland, has a 16KW Air Source Heat Pump (ASHP) which delivers heat and hotwater to the house and a large swimming pool. The electricty costs are kept lower with an integrated roof 4KW PV array which is barely visible from the road. All of these solutions are set up to be managed remotely...

  • solar thermal array on flat roof, scottish borders

    Complimentary technologies in a stunning new build

    This stunning 400m2 new build is close to passive standards and so extremely air tight. However the surfaces of the building are polished concrete and therefore could be cold to the touch. We installed a small 6KW GSHP to enable the floor slab temperature to be lifted to allow this to be warm to the touch (and also heated the 300 litre hotwater cyc...

  • Examples of renewable technologies for new builds

    With all of our new builds, we offer a range of technologies to match what the client needs and wants. We will explain how to maximise the efficiencies of the houses, use incentives with a view to very low, if not no running costs. The images here should show how renewables can be incorporated into stunning designs, without comprising any of the ar...

  • Case Study - A bespoke ground mount Solar PV in East Lothian

    As part of an eco build project, we were asked to look at a bespoke solution. We installed 12, 300W Black LG panels, and with underground armoured cable connecting this array by the house. The mounting kit was bespoke & hand made, with the panels lifted to fit raised planters and therefore less obvious. However there was nothing 'off the shelf' tha...

  • Case Study - Ground Source Heat Pumps, Solar PV, Solar Thermal and HRV

    In this new build in Gattonside, Melrose we installed a 12KW, Ground Source Heat Pump (GSHP) to provide the heat to the underfloor heating and radiators upstairs as well as the hotwater system (which we also fitted) . The Solar PV array provides the electricty to offset the house running costs. As the house if thermally very efficient, during the ...

  • inset solar PV system

    Examples of Inset Solar PV Arrays

    As with all PV arrays, indeed all technologies, new products enter the market, and products become more cost efficient over time. This has been true of the mounting kits with inset kits (ie those that sit into the roof, on the sarking or batons) become more price friendly. These tend to be fitted to new builds, or retrofitting roofs or those that a...

  • Heat Recovery & Ventilation

    With heat recovery and ventilation systems, we tend to install these in new build properties or refurbishments only. This is simply because they require a significant amount of pipework, with inlets and outlets all to be fitted, and so for retro fitting they tend to be more expensive and do require a fair amount of of upheaval . Every year we will ...

  • ASHP cylinder and controls in North Berwick

    Air Source Heat Pumps

    With most new builds, we tend to install either ground source heat pump or air source heat pumps. We also will fit to older properties but will make sure the clients are aware that radiators may need to be altered to ensure the appropriate surface area is delivered to deliver heat to the property.......

  • Stoves

    As part of a team that install many solutions to new homes, and as we are HETAS qualified, we also supply and install stoves to both old and new properties. We offer a wide range of options and can source nearly all stoves that meet the customers wishes...

Like most sites this site uses cookies : By continuing to use our site you are agreeing to our cookie policy.close & accept